Are you looking for tools and stands with good support for the maintenance of your bike? Here you will find the basic bike kits needed by cyclists who care about their maintenance, repair and safety.
Do you need cycling tools and stands to care for and maintain your bike?
At Bulevip we are going to explain everything you need to know about cycling tools and stands , from how to do a general inspection with a multi-tool to what basic tools and stands we should have to set up a workshop in your own home.
The first piece of advice that you should follow is to briefly review the condition of our bicycle before each ride: tire pressure, check that the chain is well lubricated, fill the water bottles or isotonic drink and make sure to carry the kit with you . basic bike tools This will help you keep your bike in good condition and, of course, your safety on it.
There is a wide variety of brands that have adapted cycling tools and stands to suit the needs of each type of bicycle or specialty. In the next point we give you some ideas.
If you are a cyclist who is in charge of the maintenance of his bicycle, it will be very useful for you to get one of these bike stands . They are foldable, take up very little space in the house or garage and allow you to work comfortably and efficiently on the repair or maintenance job you are doing.
Within the repair easels there are many models (fixed, folding, tripods, benches, etc...), made with different materials (aluminum, steel, etc...) and as always, at Bulevip we are accompanied by Top Brands such as : Topeak , Park Tool, Var, MSC , etc.
The reality is that there are few tools that you will need to maintain and make routine adjustments to your bike. Most are for common use and a few will be specialized bicycle tools.
The important thing is to always use the correct tool for the task. The first reason is that it will make the job easier. The second is that you will avoid damaging the screws, components or even the frame of the bicycle.
In addition to using the correct type of tool, another rule of thumb is to use the exact measurement for each bolt and nut. Not being careful with this can cause damage to the hardware.
Set of Allen keys , Philips and flat screwdrivers , open-ended wrenches , needle-nose or pliers, air pump , Torx key set , tire removers , chain breaker, chain wear gauge or indicator , pedal wrench , dynamometric
As with easels, there are many brands of tools with different qualities and qualities, such as: Topeak, Park Tool, Massi, MSC, Var, etc.
A good cyclist must be prepared for everything. Ready to beat the rain, the cold, the snow or the steepest slopes of a climb, but you also have to be prepared to solve as quickly as possible the small mechanical problems that may arise during the route.
For this, it is essential to have a basic bicycle tool kit , also called a survival kit, in order to successfully get out of some of the most common predicaments in which every cyclist finds himself at some time throughout his life.
Repairing a puncture, adjusting and correcting play in the fork or headset, repairing a broken chain or having to put the saddle back up are some of the examples of everyday problems that you may encounter on your rides. To repair any of them or other faults on your bike, it is very likely that you will need at least one of the following tools:
Mandatory tools:
In addition to the space, ergonomics and comfort features, the choice of repair stand depends on the one hand on the weight of your bike, and on the other on the frame material and main components.
We recommend paying close attention to the maximum weight supported by the kickstand before buying it, especially if you have a touring bike, a DH or Freeride MTB, or an electric bike that normally exceeds 15 or 20 kilos, as is the last case.
In this case, our advice is to be careful when closing carbon components with the pliers of your repair stand. Carbon is a very rigid and solid material, but it does not support compression. If it is damaged, it is not covered by the warranty. Therefore, we recommend choosing a repair stand with a double grip on the bottom bracket and wheel axle.
All the previous kit is really good but you already know how to carry the tools on the bike? And where are you going to keep the spare tube ? Well, you should know that there are different transport and storage options.
The tool container or tool container can is the finest option and the one that more cyclists are opting for lately. It is a simple closed drum in which you can store your basic tools comfortably and in a completely safe way . The bottle can have different capacities depending on the needs of each cyclist. But a 500ml bottle can be more than enough to save the basics and even some money or food.
The saddle bag is a cycling classic and is as useful as it is practical. A small bag or suitcase placed just under the saddle in which to comfortably store and protect all your belongings and tools . The advantage of the saddle bag over the tool bottle is that with the bottle you lose space and you can only carry a bottle of water or isotonic drink. The saddle bag is available in many sizes and in many formats so that it can be adapted to the needs of each cyclist.
As with easels, there are many brands of tools with different qualities and qualities, such as: Topeak, Park Tool, Massi, MSC, Var, etc.